- 10-bit, Analog-to-Digital Converter
- 8-bit, Digital-to-Analog Converter
- Power Supply – 24VDC/AC
- Surface Mount Device (SMD)
Description
The Open Control System Controller is a fully programmable controller that is intended for Building Lighting Control System. The Controller being fully programmable will ensure control & monitoring application versatility, allowing specific application to be created according to each facility or application requirement. The controller is a fully configurable controller based on the PIC series micro-controller with an on-board clock and two RS-485 communications Bus. The six digital outputs 240VAC relays (16 Amps) are ideal for driving contractors and lighting circuit directly. The two analog outputs (0 – 10 VDC or 4 – 20 mA) are used for lighting dimming control via conventional dimmer. The six digital inputs are be used for pulse counting and reading contact closures directly. The two analog inputs are be used for reading the lux sensor, 4 to 20mA and 0 to 10VDC input signals.
- Analog Input Monitoring
- Digital Input Monitoring
- Maintained / Pulse Digital Output Control
- Analog Output Modulating Control
- Optional Demand Limiting Control
- Logic Based Control
- Alarm Monitoring
- Trend Logging
The fact that the controller is fully programmable ensures complete control and monitoring application flexibility. The same standard controller hardware can be used for control and monitoring of the following applications:
- Lighting Control Systems.
- Other types of programs can be developed according to customers’ specifications.
Technical Specifications
| Supply Voltage/Power Consumption: | 240 VAC / 10VA (plus loads) |
|---|---|
| Protection: | 1A Fuse |
| Analog Inputs: | 2 x 10K resistance or 2 x 4 to 20mA or 2 x 0 to 10VDC. Accuracy: 0.1% full scale or 6 x for reading contact closures directly |
| Digital Inputs: | 6 x for reading contact closures directly complete with surge protection (Photo Coupler Type) |
| Analog Outputs: | 2 x 0-10VDC or 2 x 0 to 20mA. Resolution: 0.4% full scale |
| Digital Outputs: | 6 x Relay Dry Contacts with contact rating of 240VAC maximum 16Amps (2 Relay Outputs have Normally Open & Normally Close Contact). |
| Microprocessor: | PIC Micro-Controller (128 KB SRAM & 256 KB FLASH) |
| Communications: | 1 x RS-485 Bus (One Controller Bus). Baud Rate: 9600~76.8Kbps. Maximum Length: 4000 ft (1.2km) |
| Freely Programmable: | Yes, using DLC Software Tool |
| Indication: | 1 x Green LED for Power / 6 x Green LED for Digital Inputs / 6 x Green LED for Digital Outputs |
| Cover Dimension: | 146mm x 114mm x 38mm |
| Weight: | 500g |
| Ambient limits: | |
| a) Storage: | -10 to 90 ºC; less then 90% rh, non-condensing |
| b) Operating: | 0 to 70 ºC; 10 to 90% rh, non-condensing |
Controller Physical Dimension
Size: 146mm x 114mm x 38mm
All connections to the Open Control System Controller are via removable plug-in screw terminals for easy installation and servicing. The removable plug-in screw terminals accept wire sizes from 0.5 to 1.5 mm sq. section area cable.
